MOQ1
A guaranteed one by one infeed of diapers.
Delivering diapers at a continuous flow rate into the recycling process “one by one” ensures all down-stream process work as efficiently as possible.
OTESS
One Touch Exchange of Sieves & Screens
Quick exchange of screens and sieves allows change-over in under 1 minute.
PLASTIC POLISHING
Ensuring plastic is clean enough to pelletize.
Polishing plastic as the last processing step ensures any final residues of pulp and SAP are fully removed. Delivering clean plastic enables the plastic waste stream to be sent directly to a pelletizer thereby significantly increasing the sales value.
DWELL ANGEL ADJUST
Automatic adjusting sieve dwell angle.
One simple touch HMI screen adjust sieve dwell angle between 0 to 12 degrees which in full automatic mode, consistently adjusts dwell angle to achieve optimal process settings.
PULP SCANNING
Because pure is not pure enough.
For operators requiring that extra level of protection, active fiber scanning ensures contamination risks can be eliminated. External contaminants such as earplugs can also be detected and automatically removed without operator intervention.
VERTICAL STACKING
Automatic adjusting sieve dwell angle.
Rather than position each process side by side, Diaper Recycling Technology® uses a vertical stacking methodology. The vertical stacking…
AIRLESS PROCESSING TECHNOLOGY
Game changing power requirements
With air weighing 1.225 KG/M3 and air velocities requiring 21 M/S to effectively transport SAP, incumbent recycling systems require…
HI-PERFORMANCE PULP METERING TECHNOLOGY
Game changing re-feed technology
Should you wish to re-feed your pulp back to your core-former to maximize $$$ revenues, re-feeding your pulp back…
SAP – REGEN
Getting SAP back to virgin properties.
Just a small level of fiber contamination in the SAP will significantly change the flow characteristics of the SAP and effect down-stream volumetric and gravimetric dosing processes. Our SAP regeneration technology ensures that SAP quality comes back to virgin standards.
INTEGRATED SHREDDING
Integrated shredding inside the sieving process.
By integrating the sieving and shredding process additional space is saved. The smaller integrated process allows multiple processing steps…
VOLUMETRIC PULP RE-FEED
Low energy pulp-sheet feeder.
For operators requiring wishing to send pulp fibers back into wider mills such as bed pad or pet pad production systems, pulp sheet feeders ensure a consistent supply of fibers in both machine and cross direction.
GRAVIMETRIC PULP FEED
Feeding back pulp via gravimetric re-feed.
For operators requiring the most accurate pulp metering system possible, new gravimetric feed technology is the only system available today that offers re-feed capability on a gram by gram basis.
SELECTIVE SHREDDING
Ensuring shredder delivers constant sizes.
For operators requiring wishing to send pulp fibers back into wider mills such as bed pad or pet pad production systems, pulp sheet feeders ensure a consistent supply of fibers in both machine and cross direction.
GENTLE SAP EXTRACTION
Removing SAP with minimal damage.
Latest generation cross-linker SAPs are fragile and their delicate surface can be easily damaged. By gently removing the SAP…
GENTLE SAP TRANSPORTATION
Transporting SAP with minimal damage
Recovering your SAP via a gentle process would only make sense if the SAP could be transported with minimal…
SAP DRIP FEED
Feed back to production without risk.
For operators wishing to reuse reclaim SAP without process risk, drip-feed technology allows the perfect solution to re-feed SAP. Mix ratios can e adjusted in the HMI panel with volumetric and gravimetric re-feed options available.
MODULAR PLUG AND PLAY
Assemble and relocate at extreme speed.
Pulp and play modular interface design allows vertical start-up through reduced assembly time. Future relocation of the recycling assets keeps operational flexibility at a maximum.
